Scanner Launch X431 V V4.0 Elite
- Description
- Reviews
Elite X431 V V4.0 Car Full System Diagnostic Tools Auto OBD OBD2 Scanner ECU Coding 37+ Reset Active Test
Updates
1. GPF Regeneration;
2. High Voltage Battery Health Test;
3. Transport Mode;
4. Intelligent Cruise control;
5. Engine Power Balance Monitoring;
6. Stop Start
8. ECU reset
9. FEM matching
10. Clutch matching
11. Turbocharging matching (Available after selecting a system, always keep growing).
CAN FD New Protocols For GM GMC Chevrolet Cadillac ect after 2020 and other New cars (Optional )
AutoAuth for FCA, SGW (Account needs to be purchased separately)
2023 Elite - LAUNCH X431 V 4.0 Car Diagnostic Tools ,The preferred choice for millions of technicians
1. OE-Level All System Diagnosis + 37 More Reset Functions
2. ECU Coding + Active Test (Bi-Directional Control )
3. V-A-G Guided Function
4. FCA AutoAuth Access
5. 2 Years Free Update. After that, you can still use it, it will not be locked.
6. 5 Years Warranty for any Quality Problems and Lifetime Free Tech Support.
7. OE-Level car coverage. 100+ car brands, 20,000+ models from the US, European, and Asian car markets; still expanding.
8. 22 Kinds of Languages Support.
9. Compatible with X-PROG3, X-431 TSGUN, BST360, VSP-600, ADAS, WIFI Printer etc.
10. X-431 FIX Available to buy.
OE-Level Full System Diagnosis
This LAUNCH diagnostic scanner can establish a data link to all systems and subsystems of the vehicle being serviced to:
-Retrieve ECU information of the tested control units including unit type, version numbers, and other specifications, etc.
-Read & erase DTCs to locate problem areas and clear the codes.
-View Live Data of each parameter item.
The following is a list of modern vehicle systems that this scan tool can get access to:
-Engines / Auto Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self Leveling Suspension systems
-Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Electronic Power Steering & Motor Assisted / Power Steering / Tyre Pressure / Rain Sensors / 4WD System
-Stabilizer / Intelligent Parking Assist/Door Motors / Audio Systems / Air Conditioning / Tiptronic / Anti Theft / Soft Top / Headlamp Leveling / Central Locking / Automatic Clutch / DPF Reset
-Electric Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Wash Wipe / Fuel Burning Heater / Transfer Box / Seat Memory / Oil Life Service Reset / Sliding Doors / Electronic Throttle
-Navigation System / Rollover Sensor / Cruise Control / Multi Function Steering Wheel / Aux Heating / Electronic Parking Brake / Clutch Electronics ... and more.
This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.
Advanced Functions
Online Coding: Get the code from the server directly over the network and write it to the new module.
Offline Coding: Obtain the original code，and then writing it to the new ECU manually.
Ofline Programming: Program ECUs to meet vehicle variants, such as leff-hand drive or right-hand drive.
Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
Power balance Test: Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem.
Cylinder Balance test/Cylinder leakage test/Cylinder Pressure variations/Relative Compression Test.
Audi /VW firmware protection cancel features: One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications.
Active Tests /Bi-Directional Control
this LAUNCH bidirectional scan tool can output commands to a vehicle’s ECUs, read the ECU data, and monitor the operation of the actuators. Through active tests on certain components, such as a/c fan, inside mirrors, headlamps, windows, and horns, this bidirectional scanner will let you quickly know whether a specific system, component, or subsystem is functioning properly or not, helping you locate the car issues precisely.
ECU Coding - Help the newly replaced ECU/module to work properly
Why does the car not work properly after replacing the ECU/module?
When the ECU/module is damaged, replacing it with a new ECU/module is necessary. After processing the replacement, you must follow the manufacturer's strict procedures for matching, learning, coding, and even programming it to get the car to run properly. Otherwise, the car could not
IMMO Keys
Compatible with Volkswagen / Audi / Skoda / Seat etc.
Disable lost keys to prevent the car from being stolen, add new keys, and match replaced IMMO module. For more advanced IMMO programming functions, X431 V+ can use with PROG 3 key programmer.
37+ Reset Service, Keep increasing
1.Oil Lamp Reset Service – Reset the oil life systems every time the oil and oil filter are changed;
2. Injector Coding – Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
3. EPB Reset – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
4. SAS Steering Angel Sensor Reset – Perform steering angle sensor calibration and clear records;
5. BAT battery service – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
6. ABS Bleeding – When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
7. Throttle Adaptation – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
8. TPMS service – Tire pressure resetting is required to be performed after maintenance is performed;
9.Gear Learning – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced;
10. IMMO Reset - To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car. When the ignition switch key, ignition switch, combined instrument panel, ECU, BCM, or remote control battery is replaced, anti-theft key matching must be performed.
11. AFS Headlamp Reset: Initialize the adaptive headlamp system.
12. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
13. Suspension Reset:Adjust the vehicle body height sensor for level calibration.
14. Gearbox Reset; 16. Tire Reset; 17. A/F Reset; 18. Adblue Reset(Diesel Engine Exhaust Gas Filter); 19. Coolant Bleeding; 20. Language Change; 21. Nox Sensor Reset; 22. Stop/Start Reset; 23. Seat Calibration; 24. Delete Transport Mode; 25. Windows Calibration; 26.AC System Relearn/Initialization; 27. High Voltage Battery Diagnostics; 28. GPF Regeneration; 29. Camshaft/Crankshaft Sensor Relearn; 30. Interactive Vehicle Dynamics (IVD) Initialization Sequence; 31. Halt/Resume Transmission Adaptive Learning; 32. Passive Anti Theft System(PATS)Functions; 33. Relearn Vehicle Data; 34. Initialisation Of Automatic Tailgate; 35. Initialise Power Window Regulators; 36. Seat Standardisation; 37. Normalise Slide/ Tilt Sunroof; etc.
You can use Launch X431 V 4.0 escaner automotriz professional to view and capture real-time Live Data, get to know the current operating status for parameters, and provide insight into overall vehicle performance. There are three display modes available for data viewing: Graph, Value, and Combine. And you can display 12 data streams at the same time, providing great convenience for comparing data.
LAUNCH X431 V 4.0 is compatible with more module functions
LAUNCH X431 TSGUN: Perform all professional TPMS diagnostics and maintenance functions such as activating sensors, performing TPMS relearn, programming Launch Sensors, monitoring TPMS health status, etc.
LAUNCH BST360 Battery Tester: Connecting with this battery tester, X431 V 4.0 is endowed with battery diagnostic features such as battery health test, start system test and charging health test, etc., which help you to detect battery-related issues of vehicles accurately and timely.
LAUNCH VSP600 Videoscope: Make X431 V 4.0 a perfect tool for viewing and capturing video and still images of hard-to-reach areas.
LAUNCH X431 PROG3: Achieve diagnostic functions such as vehicle k ey, Engine, and gearbox programming for various vehicles.
X431 ADAS Moblie/ADAS PRO: Calibrate a wide range of camera-based & radar-based driver assistance systems.
LAUNCH X431 Wi-Fi Printer: X431 V 4.0 can be connected to WIFI printers to print out diagnostic data or reports
Extensive Vehicle Coverage - 10000+ Cars supported:
Aisa: Compatible with Changcheng, Daewoo, Huachen, Zhongxing, Indian Tata, JAC, Maruti, Perodua, Chery, Isuzu, Jinlong, Suzuki, Saipa, HM, Hmazda, Ikco, Malaysia Proton, Luxgen, Toyota, Changan, Futian, Honda, Wuling, V-class, Jpisuzu, Kia, Indian Maruti, Indian Mahindra, Malaysia Perodua, Hafei, Lifan, Mahindra, Nissan, Xiali, Zhongshun, Tata, Changhe, China GM, Saicmg, Mazda, Zhongtai, Daihatsu, BYD Flyer, Hyundai, Proton, Subaru, Ssangyong, Joylong, Mitsubishi,Gonow, Qoros, Maxus, Mvm, ect...
Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR, ect...
USA: Compatible with Gm, USAFord, Chrysler, Willy; ect...
Australia: Compatible with Austford, Holden; ect...
Brazil: Compatible with BX Fiat, BXGM, etc.
Humanized Design
Equipped with DBS car IV connector as standard, which can be directly inserted into the slot of the host connector, easy to use and not easy to be lost.
CPU: 2.0 GHz Quad-Core
OS: Android 9.0
RAM: 3GB
ROM: 32GB（can up to 128GB）
Display: 8INCH 1280*800 Resolution
Camera: 2MP(Front), 5MP(Rear)
Wi-Fi: 2.4GHz/5GHz (Dual frequency)
Test Voltage: DC 9~18V